p. 209-225
Achieving Maximum Performance of a Laser Clad Ni-based Coating Through Optimization of Laser Remelting Processing Parameters
Y.H. Yang, J.H. Li, F.P. Yao and F.Y. Zheng
Abstract
Full Text (IP)
p. 227-241
Effect of Different Post-weld Heat Treatments on the Microstructure and Mechanical Properties of Pulsed Nd:YAG Laser Welded Hastelloy C-276/Monel 400 Sheets
N. Sivagurumanikandan, G. Shanthos Kumar, S. Saravanan and K. Raghukandan
Abstract
Full Text (IP)
p. 243-256
A Multiple Layer Mapping Method Combing Light Weight and Ground-optimized LiDAR Odometry and Mapping (LeGO-LOAM) with a Loop Closure Detection Algorithm
T. Xie, X-L. Peng, P-Zhang, B. Lu, S-G. Song and S-F. Wang
Abstract
Full Text (IP)
p. 257-273
Characterization of Excimer Laser Micromachining Parameters to Derive Optimal Performance for the Production of Polydimethylsiloxane (PDMS)-based Microfluidic Devices
S. Johari, Z. K.Ting, M. Mazalan, Y. Wahab, A. M. Noor, M.F. Ahmad and M. M. Ramli
Abstract
Full Text (IP)
p. 275-291
Multi-objective Optimization of Laser Cutting Parameters Using Particle Swarm Optimization (PSO)
P. Kalvettukaran, A.D. Chakravarty and D. Misr
Abstract
Full Text (IP)
p. 293-311
Optimizing the Microstructure and Mechanical Properties of a Laser Clad Ti-6Al-4V Coating by Laser Shock Peening (LSP)
W-B. Ren, S-Y. Fang, J-H. Li, W-C. Yu and Y-J. Wang
Abstract
Full Text (IP)
p. 313-334
Process Optimization of a Fe-Based Coating Laser Clad onto a 42CrMo Steel Coal Mine Roller
L.J. Cui, Y-S. Ding, S-R. Guo, Y-H. Cui, X-L. Li, Y-Q. Chen and B. Zheng
Abstract
Full Text (IP)
p. 335-353
Ideal Selection of the Most Suitable Laser Powder Bed Fusion (LPBF) Scheme for Medical Applications Using Multi-criteria Decision Making (MCDM) Techniques
N. Nag, M. Chandra, K.H. Kazami, A.K. Shukla and S.K. Sharma
Abstract
Full Text (IP)
p. 355-366
Measurements of Hyperproteinaemia in Human Blood Using Laser Interferometry: In Vitro Study
H. Ullah, A. Ghalib, M. Akhtar, R. Mehmood, A. Akram, Z. Batool, A. Nazir, G. Gilanie and S. Habib
Abstract
Full Text (IP)
p. 367-385
Failure Analysis and Microstructural Evolution of Fibre Laser Welded Dissimilar Al Alloy Joints
Y. M. Baqer, S. Ramesh, F. Yusof and M. Z. Ibrahim
Abstract
Full Text (IP)
p. 387-404
A Point Cloud Error Compensation Model Based on Additional System Parameters
S. Yue, D-J. Cai, D-J. Yue and C-Z. Zhai
Abstract
Full Text (IP)