p. 187-199
Fabrication of Crack-free Glass Microfluidic Chips with Tape-assisted Laser Engraving
L-L. Sun, X. Yang, A. Ding, B-Y. Zhang and Z-F. Yin
Abstract
Full Text (IP)
p. 201-215
A Novel Radio Frequency Identification (RFID) Dynamic Performance Measurement System Based on Laser Ranging and Humidity Control
Z-L. Liu, X-L. Yu, Z. Zhu, X. Zhuang, L. Li and Z-M. Zhao
Abstract
Full Text (IP)
p. 217-231
Effect of Nb Content on the Microstructure and Mechanical Properties of a Stellite 20 Laser Clad onto Cast Steel
X-Y. Gu, H.T. Gong, Y-J. Song, X-P. Gu, H-M. Li, X-H. Zhao and L Liu
Abstract
Full Text (IP)
p. 233-245
Laser and Laser-Liquid Composite Etching of Si Wafers
X. Li, Y-L. Chen, X-D. Si, H-G. Li and X-H. Chen
Abstract
Full Text (IP)
p. 247-260
Fingertip Touch-based Non-invasive Glucose Sensor Using Visible Laser Light in a SiO2-Au-SiO2 Coated Prism: Design and Implementation Using the Matrix Method
S.P. Dash, M. Hota and S.K. Triapthy
Abstract
Full Text (IP)
p. 261-281
Morphology Control and Process Optimization for the Laser Cladding of Ni60 Alloy onto H13 Steel
J-H. LI, S-L. Xue, F-P. Yao, X-J. An and J-B. Jin
Abstract
Full Text (IP)
p. 283-297
Deformation Behaviour of Open-cell AlSi10Mg Alloy Formed By Selective Laser Melting (SLM)
P-K. Bai, X. Yang, J. Wang, W-B. Du, Z-Y. Zhao and W-X. Wang
Abstract
Full Text (IP)
p. 299-308
Research State-of-the-Art on Controlling Ti-Al Intermetallic Compound (IMC) Formation During the Laser Beam Welding (LBW) of Ti and Al Alloys
D-S. Yu, J-P. Zhou and Y. Zhang
Abstract
Full Text (IP)
p. 309-318
Investigation of Six Contamination Parameters Via a Two-dimensional (2-D) Photonic Structure (PhC) Using an Infrared (IR) Laser Beam
B.A. Kumar, S.K. Sahu and G. Palai
Abstract
Full Text (IP)
p. 319-339
Describing the Influence of Laser Cutting Parameters on a SiC Reinforced Al Alloy Metal Matrix Composite (MMC) Using Response Surface Methodology (RSM)
C.M. Shajahan, H. Lalhmingsanga and B. Kuriachen
Abstract
Full Text (IP)
p. 341-359
Parameter Optimization for Laser Ring Welding Dissimilar Steel Piston Rods
F-P. Yao, J-H. Li and T-Y. Liu
Abstract
Full Text (IP)
p. 361-374
Analysis of Powder Feeding Behaviour in Coaxial Laser Cladding
Y.H. Cui, L.L. Wu, Y.C. Yang, Y.C. Lan, J.L. Lin, N.W. Fang, X.Y. Chen and R. Li
Abstract
Full Text (IP)