p. 193-210
Experimental Method for a Double-pulse Laserdriven Flyer and Flyer Motion Simulation
D-S. Geng, L. Chen J-Y. Lu, J-Y. Wu and K. Yang
Abstract
Full Text (IP)
p. 211-220
Correlated Interference Modulated by Mathematical Algorithms Established Using a He-Ne Laser
D-Q. Xu, D-Z. Cao, L-Y. Dou and X-B. Song
Abstract
Full Text (IP)
p. 221-233
Comparative Study of Laser and Water Jet-assisted Laser Surface Processing of SiC
X. Li, X-H. Chen, H-G. Li, X. Xu and W. Liu
Abstract
Full Text (IP)
p. 235-243
Achieving Refined Overlay Microstructure of a Zn-55Al-3Mg-1.5Si Coating Using High Power Diode Laser (HPDL) Surface Treatment
C-T. Peng, M. U. Forthan, Z. Chen, Q. Liu, D. Nolan, H. Li, M. Liu and R. Luo
Abstract
Full Text (IP)
p. 245-266
Effect of a Cu Interlayer on the Joining of a TiAl-based Alloy and a Ni-based Superalloy by Laser Welding
Z.Y. Xiao, X.L. Cai, H.Y. Zhao, K.Y. Wang, X.Y. Gu and H.M. Li
Abstract
Full Text (IP)
p. 267-277
Identification of Liposarcoma from Biopsy of the Abdomen Using Microscopy with a Diode Laser Light Source at a Wavelength of 630 nm and an Ultraviolet (UV)/Visible Spectrophotometer in the Wavelength Range of 190 to 1100 nm
H. Ullah, M. Rizwan A. Nazir and Z. Batool
Abstract
Full Text (IP)
P. 279-288
On the Applicability of Standard Resolution Targets in Quantitative Phase Imaging Based on Multi-Angle Laser Illumination Digital Holographic Microscopy (DHM)
J-S. Lu, Y-N. Zeng, X-Y. Chang, Y-J. Hong and Xd. Hu
Abstract
Full Text (IP)
p. 289-298
Laser-Induced Superhydrophobic and Oleophobic Surface Structures on Float Glass
R. Jagdheesh, R. Bičišťová, J. Brajer and T. Mocek
Abstract
Full Text (IP)
p. 299-310
Anti-Icing Characteristics of A 7075 Aluminium Alloy Surface Laser Textured and Coated with Superhydrophobic Perfluorodecyltrichlorosilane (FDTS)
C. Qiu, Y. Kou, M. Li and S-X. Chen
Abstract
Full Text (IP)
p. 311-330
Low Power Laser Transmission Welding (LTW) of Clear-to-Clear Acrylic Transparent Polymers
D. Kumar, A.S. Kuar and N. Maity
Abstract
Full Text (IP)
p. 331-348
Microstructure and Mechanical Analyses of Laser Clad Stainless Steel and Stainless Steel–SiCp Mixture Powders on a Mild Steel Substrate
H. A. Sabour, M. A. Taha, K. A. Gany, A. Farid, A. G. Youssef and Y. H. Elbashar
Abstract
Full Text (IP)
p. 349-357
Laser Cladding of Ti6al4v Alloy with Al2o3-Sic-Ag Modified Titanium Powder and the Accompanying Protection
B-G. Yan, B. Hu, L. Jin, L. Zhu, P-J. LV, P. Lu, F. Wang, B. Liu and K-Y. Jiang
Abstract
Full Text (IP)
p. 359-365
A Thin Silver-Based Hafnium Oxide (Hfo2/Ag/Hfo2) Layer Deposition Technique and Laser Optical and Surface Morphology Characterization
M. Asif, M. Ramzan, H. Ullah, M. Imran, G. Naz, F. Fahim and A.R. Khan
Abstract
Full Text (IP)
p. 367-377
Laser-Based Detection of Rotation Speed with High Accuracy and High Signal-to-Noise Ratio (SNR) Based on the Rotational Doppler Effect
Z-M. Li, L-L. Chen, Y. Ren, S. Qiu, T. Liu, C. Wang and H. Wang
Abstract
Full Text (IP)