p. 1-15
Laser Technology for Analysis, Cleaning and Restoration of Ancient Painted Artworks
J. P. Dudeja
Abstract
Full Text (IP)
p. 17-32
Experimental Validations of Divergent Beam Illumination and Detection Conditions in a Surface Plasmon Resonance Sensor Using a Powell Lens
J. Widjaja and J. H. Hossea
Abstract
Full Text (IP)
p. 33-42
Life Cycle Assessment (LCA) of Welded of AISI 304 Stainless Steel Using Laser Beam Welding (LBW), Friction Stir Welding (FSW) and Gas Tungsten Arc Welding (GTAW)
A. A. Afzal, M. Mobeen Shaukat, B. S. Yilbas, S. S. Akhtar and F. Al-Badour
Abstract
Full Text (IP)
p. 43-62
Application of Laser Ranging and Grey Neural Network (GNN) for the Structure Optimization of Radio Frequency Identification (RFID) Tags
X. Zhuang, X.L. Yu, Z.M Zhao, D. Zhou, W.J. Zhang, L. Li and Z.L. Liu
Abstract
Full Text (IP)
p. 63-79
The Effect of Femtosecond Laser Surface Textured Microdimples Array on Friction Reduction Under Full Oil Lubrication Conditions
P. Zhang, S. Wu, H-J. Wei and L. Chen
Abstract
Full Text (IP)
p. 81-90
Decreasing Surface Roughness of Microchannels CO2 Laser Cut into Polystyrene (PS) to Produce Microfluidic Chips by Optimizing Operating Parameters
C-M. Hou, S-X. Wang, R-H. LV, Y-S. Huang, Z. Tian, Y-Z. Mu and X-Y. Chen
Abstract
Full Text (IP)
p. 91-105
A Two-Step Phase-Shifting Compressive Optical Image Encryption and Hiding System Based on a Mach–Zehnder Interferometer (MZI)
N. Xu, Z-Y. Zhang, J. Li and Z-H. Huang
Abstract
Full Text (IP)
p. 107-120
Comparative Studies on the Metallurgical and Mechanical Behaviour of CO2 Laser Beam and Pulsed Current Gas Tungsten Arc Welded Stainless Steel
G. Shubham, S.M. Muthu, N. Arivazhagan, K.V. Phani Prabhakar and M. Arivarasu
Abstract
Full Text (IP)
p. 121-150
Two-Dimensional (2-D) Kalman Segmentation Approach in Mobile Laser Scanning (MLS) Data for Panoramic Image Registration
B. Ergun, C. Sahin and A. Aydin
Abstract
Full Text (IP)
p. 151-161
Fabrication of a Polyethylene Terephthalate (PET) Microfluidic Chip Using CO2 Laser and Hot Bonding Technologies
X-Y. Huo, S-X. Wang and X-Y. Chen
Abstract
Full Text (IP)
p. 163-181
Microstructure Characterisation and Mechanical Properties of Ti/TiBCN Coatings Fabricated by Laser Cladding
L.Y. Wu, Y.X. LI, Z.Y. Zhao, P.K. BAI, Z.H. LI, J. LI, P.C. Huo and W.B. Du
Abstract
Full Text (IP)
p. 183-194
Optimization of Ball Milling Process of Graphene/Al Matrix Composite Powder and Selective Laser Melting (SLM)
Y. H. Zhao, L. Gao, L. Tan, J. H. Wang, B. Han and Z. Y. Zhao
Abstract
Full Text (IP)