p. 1-25
Microstructure and Wear Behaviour of 38CrMoAl Steel Laser-Processed with the Addition of MoS2 or WS2
R. Zhou, Z.P. Tong, G.F. Sun, Z.H. Ni and W. Zhang
Abstract
Full Text (IP)
p. 27-40
The Effect of Deposition Thickness on the Microstructure and Hardness of Laser Forming Repaired 300M Steel
F-G. Liu, X. Lin, H-O. Yang and W-D. Huang
Abstract
Full Text (IP)
p. 41-55
Characteristic Analysis of Processing Defects in Stainless Steel After Laser Cutting
L-J. Yang, Y. Ding, Q. Li and Y. Wang
Abstract
Full Text (IP)
p. 57-72
Microstructure and Mechanical Properties of a 10CrNi3MoV Thick Plate Welded Joint Using Narrow Gap Laser Welding with Filler Wire
Y. Zhao, F. Su, J. Huang, J-S. Zou and Y-X. Wu
Abstract
Full Text (IP)
p. 73-99
Investigation into Laser Perforation of Rock for Petroleum Exploitation
M-Y. LI, B. Han, S-Y. Zhang and Y. Wang
Abstract
Full Text (IP)
p. 101-110
A Simple Interferometric Configuration for Measurement of the Coefficient of Thermal Expansion of Selected Metals
Y. Ozturk, I. Akkaya and E.B. Cevizci
Abstract
Full Text (IP)
p. 111-128
Thermal Fatigue Behaviour of Cast Iron Induced by Pulse Laser Heating: Numerical Simulation and Experimental Studies
H. Liu, P-J. Chen, J-B. Hao, H-F. Yang, X-L. He and G. Yu
Abstract
Full Text (IP)
p. 129-137
Calibration of Photoelectric Response Characteristics of a Scientific Grade Charge-coupled Device (CCD) Camera Based on Wedge Interference
H. Lin and Z-S. Da
Abstract
Full Text (IP)
p. 139-158
Salt Spray Corrosion Properties of an Anodic Oxidation Film Produced on 7475 Aluminium Alloy by Laser Heat Treatment
D-H. Zhang, J-C. Wang and D-J. Kong
Abstract
Full Text (IP)
p. 159-166
The Study of Hair from Men with Androgenetic Alopecia Using the Laser-induced Breakdown Spectroscopy (LIBS) Technique
S. Hamzaoui, I. Cherni and N. Jaïdene
Abstract
Full Text (IP)
p. 167-186
Influence of Aircraft Attitude Fluctuations on Point Cloud Density and Digital Surface Model (DSM) Accuracy from Airborne LiDAR
J-J. Wang, L-J. Xu, Y-Y. Fan, X-S. Guo and X. Liu
Abstract
Full Text (IP)
p. 187-203
Simulation of the Temperature Field During the Selective Laser Melting (SLM) of a Ni-based Alloy Powder onto a Steel Plate
Z.Y. Zhao, P.K. BAI, R.G. Guan, L. Tan, H.H. Liao, Y.H. Cheng and M.J. Liang
Abstract
Full Text (IP)
Supplement
p. 15-29
Characterization of a Yb:YAG Disk Laser Line Welder for Ultra-thin Steel Strip in Industrial Cold-Rolling Mill
J. Choi
Abstract
Full Text (Open Access)