p. 225-244
Using a Hybrid Neural Network to Predict the Surface Morphology of Laser Surface Textured Ni-coated MoS2 40Cr Alloy Steel
J-W. Sun, P. Yi, H-Y. Jia, X-S. Yang, Y-P. Zhan and K. Gao
Abstract
Full Text (IP)
p. 245-258
How Different Heat Treatments Effect the High Temperature Hardness and Wear Properties of Laser Deposited IN718 Alloy
J. Zhang, Q. Xu, Q-L. Zhang, J-H. Yao, Z-S. Wu and J-W. Duan
Abstract
Full Text (IP)
p. 259-273
Relationship Between Grain Size and Corrosion Resistance of (Ti-V)Cp/Fe Composite Laser Clad Layers
H. Zhang, S-T. Jiang, K-T. Mei, Y-Q. Duan and X-J. Cha
Abstract
Full Text (IP)
p. 275-290
Microstructure and Properties of CuSn8Ni/ST37-2G steel Composites Prepared by Laser Cladding
J-Q. Si, X-G. Wang, Y-M. Huang, X-H. Wang and H. Ming
Abstract
Full Text (IP)
p. 291-299
Effect of Laser Surface Treatment on the Microstructure and Bonding Performance of a Carbon Fibre-reinforced Polymer (CFRP) Composite
M. Zhong, Z-R. Qian, T. Yang, T-Q. Li, S-L. Li, Q-R. Tang and W-F. Yang
Abstract
Full Text (IP)
p. 301-317
Microstructures and Physical Properties of CoCrFeNiMoxSi0.3 High-entropy Alloy (HEA) Coatings Laser Clad onto Q235 Steel
M-Y. Li, F-H. Qi, J-L. Li, B. Han, L-X. Song and M-L. Liu
Abstract
Full Text (IP)
p. 319-333
Variances in Microstructure Evolution and Mechanical Properties of Dissimilar Steel Welded Joints Produced with Tungsten Inert Gas (TIG) Welding and Laser Beam Welding (LBW)
Y-L. Xu, P. Qian, J Liu, J-Y. Lin, J-Y Li and M-X. Shi
Abstract
Full Text (IP)
p. 335-351
Tribological Properties of a Laser Textured Superhydrophobic TC4 Ti Alloy Surface
J-L. Guo, F. Wang, J.J. Liou and Y-H. Liu
Abstract
Full Text (IP)
p. 353-366
Optimization of the Microstructure and Mechanical Properties of 7075 Al Alloy Fabricated Using Laser Metal Deposition (LMD)
Y. Shao, P. Xu and Z-W. Hu
Abstract
Full Text (IP)
p. 367-387
Analysis of Local Deformation of Buildings Based on Point Cloud Surface Feature Constraints
B.X. Zhou, H.F. Zhang, D.Y. Ma and X.Z. Liu
Abstract
Full Text (IP)
p. 389-403
A Deep Penetration Laser Cladding and Remelting Approach Developed for the Remanufacture of TC4 Alloy Parts
H-T. Huang, L-Z. Shen, M-X. Chen, S-L. Hu and S-Y. Xiao
Abstract
Full Text (IP)