p. 1-15
In-plane Polarimetric Light Scattering Imaging of Wooden Surfaces
C-Y. Liu, S-H. Lin and C-J. Shih
Abstract
Full Text (IP)
p. 17-34
Rock-based Landslide Safety Monitoring Using Terrestrial Laser Scanning Technology
X-T. Guo and T. Huang
Abstract
Full Text (IP)
p. 35-46
On a Self-diagnosing System for a Liquid Core Optical Fibre (LCOF) Intelligent Composite Structure
L-B Shen, Z-M. Zhao, Y-W. Wu, Y-S. Yu, K. QIAN and J-L. Liu
Abstract
Full Text (IP)
p. 47-60
Experimental Investigation of the Laser Forming of Al 2024 Aluminum Alloy
K. Venkadeshwaran, D. Misra, S. Das and K. Shanker
Abstract
Full Text (IP)
p. 61-76
Generation and Propagation of Double-half Gaussian Hollow Beams by a Paraxial Optical System in a Turbulent Atmosphere
W.G. Cao, J. Duan, Y.T. Liu, H.N. Yang, M. Hu, D. Han, Y.L. LI and Y.F. Lu
Abstract
Full Text (IP)
p. 77-93
A Complete Calibration Method for a Line Structured Light Vision System
Q.C. Sun, R.Y. Liu, H.L. Zhang and Q.C. Tan
Abstract
Full Text (IP)
p. 95-103
A Special Long Beat Length Crystal Circular Polarization Maintaining Optical Fibre Sensing Ring
Q. Tao and D-M. Peng
Abstract
Full Text (IP)
p. 105-111
Hot Corrosion Behaviour of Laser Melted Gp1 Stainless Steel Powder in a Molten Chloride and Sulphide Environment
A. Kurian, M. SIVA Prasad, A. Ajith, T.J. Cijesh, M.G. Deepu and B. George
Abstract
Full Text (IP)
p. 113-123
A Simple Scanning Method Based on a Sinusoidal Waveform for High Speed Atomic Force Microscopy
Y-Y. Wang, X-D. Hu and L-Y. Xu
Abstract
Full Text (IP)
p. 125-134
Creating Superhydrophobic Surface Structures Via the Rose Petal Effect on Stainless Steel with a Picosecond Laser
J. Lawrence and D.G. Waugh
Abstract
Full Text (IP)
p. 135-148
Prediction and Characterization of Plastic Damage in a Weld Joint Resulting from Laser Shock Processing
X-L. Wei, M. Zhang and X. Ling
Abstract
Full Text (IP)
p. 149-156
Preparation, Microstructure and Wear Performance of a Laser Clad Mgal2C2 Matrix Composite Coating on Titanium
P. Li
Abstract
Full Text (IP)
p. 157-167
Laser-Tungsten Inert Gas (TIG) Hybrid Welding of a 5052 Aluminum Alloy, Part A: Weld Bead and Microstructural Analysis
X-H. Xu, X-F. LI, Z-J. Kang, W-G. Zhai, P. Hua and W. Zhou
Abstract
Full Text (IP)
p. 169-175
Laser-Tungsten Inert Gas (TIG) Hybrid Welding of a 5052 Aluminum Alloy, Part B: Microhardness and Tensile Strength Analysis
X-H. Xu, X-F. LI, W-G. Zhai and W. Zhou
Abstract
Full Text (IP)
p. 177-195
Numerical Simulation and Experimental Validation of the Temperature Field Generated During Pulsed Laser Processing of Notches for Fracture Splitting of an Engine Crankcase Main Bearing Seat
S-Q. Kou, Y. Gao and Y. Zhao
Abstract
Full Text (IP)